Tying your own rubbers from bulk rubber is a great way to save money. It also gives you the ability to really fine tune your guns performance and lets you make repairs and modifications in the field with a minimum of tools. It is also very easy!
ITEMS REQUIRED:
Bulk speargun rubber
Wishbones
2mm constrictor cord
T-Tool
.jpg "TIE RUBBER 1(copy)") STEP 1.Cut rubber to the required length. |
.jpg "TIE RUBBER 2(copy)") Step 2.Use your t-tool to insert the wishbone into the rubber. Lubricate the bead with soapy water to help it go in easily. |
.jpg "TIE RUBBER 3(copy)") Step 3.With your constrictor cord, tie a clove hitch around the end of the rubber and pull down tight. Twisting the rubber as you tighten the knot helps to keep it neat. |
.jpg "TIE RUBBER 4(copy)") Step 4.Carefully melt the ends of the constrictor cord to prevent them from fraying and to keep them neat. |
.jpg "TIE RUBBER 5(copy)") Step 5.Repeat steps 2-4 with the other side. If necessary loop the rubber through your gun muzzle before closing the end. |
.jpg "TIE RUBBER 6(copy)") Step 6.Fit your rubber to your gun. |